Select Page

     The Receiver

The receiver is a small unit that communicates with the hand-held transmitter. It sends information to the wing servos and to the speed controller. The receiver is compatible only with the Wingbeat transmitter. If another transmitter is to be used, an appropriate receiver must be fitted.

If for some reason the transmitter and receiver are not connected to each other (so you cannot apply throttle) then you can try to rebind the receiver and transmitter.

Switch on your transmitter, then your model. Then press and hold the little black button at the back of the receiver for 4 seconds. The green LED (look carefully, it’s not obvious) will blink a few times and become solid again.

Now re-connect your model and off you go!

For more detailed instructions, click the button below: