Speedcontroller

Description

Specifications:

Max Current: 40A
Max Voltage: 6s 22.2V
BEC: 4A

If you experience any problems with a lack of power than you can always try a “throttle calibration” first. This assures you that the speedcontroller starts at zero when your throttle stick is at the bottom position, and ends at 100% when the stick is at the full throttle position.

It never harms to do this once in a while:

1. Transmitter on
2. Throttle stick FULL
3. Connect the Robara
4. Wait till you hear two beeps, then lower your throttle stick.
5. Done!